wlan0 Link encap:Ethernet HWaddr 94:a4:08:b6:3a:ea Driver usb inet addr:192.168.2.190 Bcast:192.168.2.2

The output shows information about the network interface wlan0. - The Link encap field indicates that the interface uses Ethernet framing. - The HWaddr field displays the MAC address of the interface. - The Driver field shows the driver being used for the interface, which is usb in this case. - The inet addr field displays the IPv4 address assigned to the interface, which is 192.168.2.190. - The Bcast field shows the broadcast address for the subnet. - The Mask field displays the subnet mask being used, which is 255.255.255.0. - The inet6 addr field displays the IPv6 link-local address assigned to the interface. - The UP field indicates that the interface is up and running. - The BROADCAST and MULTICAST flags indicate that the interface supports broadcasting and multicasting. - The MTU field displays the maximum transmission unit size for the interface. - The RX packets and TX packets fields show the number of received and transmitted packets respectively. - The errors field shows the number of errors encountered during transmission or reception. - The dropped field shows the number of packets that were dropped due to errors or congestion. - The overruns and frame fields indicate if there were any buffer overruns or frame errors. - The collisions field shows the number of collisions detected on the interface. - The txqueuelen field displays the length of the transmit queue. - The RX bytes and TX bytes fields show the total number of bytes received and transmitted respectively.